Skip to content
House Roadmap
Get quotes

Home upgrades in London

Nearly two in three homes are flats or maisonettes, which rules out most of the standard advice: no roof of your own, nowhere for a cylinder, and a freeholder between you and the decision. London also rates best of any English region, because flats are cheap to heat per square metre — not because they are well built.

C

The median home here is band C

70 pointsagainst 69 across England and Wales

Homes
3,424,000
DESNZ, 2024
Band C or better
53%
England and Wales 48.5%
Solar panels
202
Per 10,000 homes

Households: DESNZ estimates for 2024. Rating bands: ONS, 2024. Housing stock: EPC register to 9 September 2026. Solar: DESNZ, 2024.

Map of the 33 councils in London, each shaded by the median energy rating of its homes.Barking and Dagenham: median CBarnet: median CBexley: median DBrent: median CBromley: median DCamden: median CCity of London: median CCroydon: median DEaling: median CEnfield: median DGreenwich: median CHackney: median CHammersmith and Fulham: median CHaringey: median DHarrow: median DHavering: median DHillingdon: median DHounslow: median CIslington: median CKensington and Chelsea: median CKingston upon Thames: median DLambeth: median CLewisham: median CMerton: median DNewham: median CRedbridge: median DRichmond upon Thames: median DSouthwark: median CSutton: median DTower Hamlets: median CWaltham Forest: median DWandsworth: median CWestminster: median C

London: 33 councils

© OpenStreetMap contributors

  • A
  • B
  • C
  • D
  • E
  • F
  • G
Each council is shaded by the median rating of its homes on the EPC register. Councils with a page of their own link to it.

In short: what makes London different

  1. Installed costs run about 21% above the UK median, the largest premium of any region, driven by labour, parking and access rather than materials.

  2. Richmond upon Thames refuses nearly a third of domestic energy applications — the lowest approval rate of any authority we track.

  3. The capital rates best in England on EPC and worst on solar uptake, which is the clearest evidence anywhere that the band is not a measure of what a home needs.

The housing

What London is built from

Age decides what the walls are made of, type decides what you can do to them, and the heating fuel decides whether a heat pump saves money or merely moves the emissions. Everything else follows from these three.

When it was built

Share of homes by construction period.

  • Before 19009.1%
  • 1900-192920%
  • 1930-194919%
  • 1950-196610%
  • 1967-19757.2%
  • 1976-19823.5%
  • 1983-19903.8%
  • 1991-20025.9%
  • 2003-20117.2%
  • 2012 onwards15%

Anything built before 1930 is almost certainly solid walled. Anything after 1990 has insulation in the cavity as built.

What type of home

Share of homes by property type.

  • Flat60%
  • House33%
  • Maisonette6.1%
  • Bungalow1.3%
  • Other0%

Flats are the hardest to improve: no roof of your own, nowhere for a cylinder, and a freeholder in the way.

How it is joined to its neighbours

Share of homes by built form.

  • Mid-terrace44%
  • Semi-detached22%
  • End-terrace18%
  • Detached12%
  • Other4.5%

Every shared wall is one that loses no heat, which is why a mid-terrace needs a smaller heat pump than a detached house of the same floor area.

How it is heated

Share of homes by main heating fuel.

  • Mains gas80%
  • Electricity13%
  • Community7.3%
  • None0.3%
  • Other0.2%

Off-grid homes on oil or LPG pay the most per unit of heat, and gain the most from changing the system.

Who lives there

Share of homes by tenure, as the certificate recorded it.

  • Owner-occupied46%
  • Rented (private)35%
  • Rented (social)20%

Owners decide for themselves; tenants need a landlord to agree, and social landlords upgrade in whole estates. 23% of certificates don't say, and are left out.

What the walls are

Share of homes by wall construction and insulation.

  • Cavity, filled19%
  • Cavity, partly filled2.1%
  • Cavity, empty9.2%
  • Solid, insulated2.6%
  • Solid, uninsulated44%
  • Built to a modern standard14%
  • Timber, system built or other9.2%

An empty cavity is the cheapest big fix in the country. A solid wall can only be insulated inside or out, at many times the price.

What is over the top floor

Share of homes by roof, and loft insulation depth.

  • Loft, no insulation11%
  • Loft, under 100 mm5.1%
  • Loft, 100 to 199 mm13%
  • Loft, 200 mm or more9.8%
  • Loft, depth not recorded4.9%
  • Flat roof, roof rooms or thatch7.9%
  • Built to a modern standard5.1%
  • Another home above44%

Current guidance is 270 mm in a loft. Anything under 100 mm is worth topping up before anything else.

From the EPC register to 9 September 2026: 3,029,767 homes with a certificate, each counted once from its latest. Homes that have never had one aren't included, and unknowns are left out of the shares.

Ratings

How London rates

The median home here scores 70, which is band C. On the same certificates, the median potential score reaches band C — and that potential assumes every recommendation is carried out.

C

Median today

C

Median potential

Homes in band C or better53%

England and Wales average 48.5%

The best and worst rated of its 33 councils

Highest median

  1. CTower Hamlets77
  2. CCity of London73
  3. CGreenwich72
  4. CHackney72
  5. CNewham72

Lowest median

  1. DRichmond upon Thames66
  2. DHavering66
  3. DBromley66
  4. DBexley66
  5. DRedbridge67

Band spread against England and Wales

Bars are this area. The vertical rule on each track is the England and Wales average for that band.

England and Wales average

  1. A0.2%
  2. B17.2%
  3. C35.6%
  4. D36.3%
  5. E9.6%
  6. F0.9%
  7. G0.3%

A bar to the right of the rule means this area has more of its homes in that band than the country as a whole.

Band shares are ONS figures for 2024, over homes with a certificate. The median score is from the EPC register.

What needs doing

What the certificates in London say

Every certificate records what the assessor found and lists the improvements that would raise the rating. Added up, they show where the easy work is still undone.

  • Cavity walls still empty

    37.2%

    Against 25.9% across England and Wales

  • Lofts under 100 mm

    37.3%

    Against 22.1% across England and Wales

  • Any single glazing

    19.3%

    Against 10.7% across England and Wales

  • Off the gas grid

    14.5%

    Against 16.1% across England and Wales

What the certificates recommend

Share of homes whose latest certificate recommends each measure.

  1. Solid wall insulation45%
  2. Solar panels33.1%
  3. Low energy lighting32.4%
  4. Floor insulation32%
  5. Solar water heating25.4%
  6. Condensing boiler16.2%
  7. Double glazing15.8%
  8. Heating controls13.4%

A certificate recommends what would raise its rating, which isn't always what would save the most. Older certificates recommend by older rules.

Heating, hot water and lighting

£828a year, on average

Today
£828
All done
£614
With every recommendation done
£614
Difference
£214 a year
England and Wales average
£981

The certificate's own estimate, at standard occupancy and at the fuel prices its method used when it was lodged, not today's prices or anyone's actual bill.

From the EPC register to 9 September 2026, each home's latest certificate. Walls, lofts and glazing are as the assessor found or assumed them, so work done since a home's last certificate doesn't show.

What people fit

What is actually being installed here

Homes per 10,000 with each measure fitted so far, against every nation and region. The gap is rarely about the weather and usually about tenure, roof ownership and how generous the local grant route is.

Heat pumps per 10,000 homes

London: 84, ranked 9 of 12. England and Wales: 160.

Homes whose certificate names a heat pump as the main heating, per 10,000 homes with a certificate.

Solar panels per 10,000 homes

London: 202, ranked 12 of 12. England and Wales: 592.

Solar installations of every size in 2024 (DESNZ), per 10,000 households. A few are on businesses, not homes. EPC certificates record panels on only 0.4% of homes, because most were lodged before the panels went up.

Costs

What the work costs

These are national figures, not London ones. Nothing published gives installed cost by area, so we don't invent a local premium: labour, access, parking and travel do move the price, and we will show by how much when quote data can.

National installed costs by measure
MeasureTypical costWhere it comes from
Air source heat pump£11,128–£15,627Boiler Upgrade Scheme, middle half of jobs
Solar panels£8,000–£10,000EPC method
Cavity wall insulation£900–£1,500EPC method
Solid wall insulation£7,500–£11,000EPC method
New gas boiler£2,200–£3,500EPC method
Loft insulation£900–£1,200EPC method

The EPC method's figure is the range the middle recommendation was given — the same for every home, so a guide rather than a quote. The heat pump figure is what Boiler Upgrade Scheme installers reported, with the grant still in it.

Installers

MCS certified installers near London

275 certified installers are based in London and say they cover it. Here are some of them, led by those with a website and those registered for the Boiler Upgrade Scheme.

  • Based in London

    275

    MCS certified

  • Fit heat pumps

    130

    105 registered for the Boiler Upgrade Scheme

  • Fit solar panels

    187

  • Fit batteries

    127

From the MCS register, as it stood on 22 September 2026. Nobody pays to appear here. Certification says an installer may do the work, not how well they do it, so get three quotes against the same written scope. How to check an installer

Check your home

Enter your postcode and pick your address. We'll show what its energy certificate says, what would suit it and which grants apply.

Get quotes from installers

Free, from up to 3 installers who cover your postcode. They pay us a fee; you don't have to go ahead.

Planning

Planning permission in London

Most heat pumps, solar panels and insulation need no application at all. England's rules sit in the General Permitted Development Order. Domestic heat pump limits were widened in 2024, and the one-metre boundary rule was removed for most properties. The figures are for the work that did need one, across every kind of application.

  • Applications approved

    82.3%

    Every kind of development

  • Decided in time

    92.5%

    Eight weeks or an agreed extension

  • Householder decisions

    24,758

    In the year ending March 2026

  • Conservation areas

    1,141

    Where appearance decides

MHCLG planning statistics, year ending March 2026, for every council in London; conservation areas from the Planning Data platform. Approvals count every kind of development, and permitted development never appears at all. The 19,800 listed buildings here are a placeholder: the Planning Data platform holds them with no authority against them.

What trips applications up in London

  • More than a thousand conservation areas cover the capital, and they are the reason permitted development does less work here than anywhere else in the UK.

  • Flat owners face a second gate before planning: the freeholder and the lease. A great many installations stop there and never reach an application at all.

What needs an application

Listed buildings, the front of a house in a conservation area, external wall insulation and anything over the size limits. The rules for every measure, in all four nations, are on one page.

Planning permission for home upgradesSolar panels in a conservation area

Councils

Who decides your application

The 33 councils in London, A to Z. Approval rates are each authority's own record, across every kind of application, and they vary far more within a region than between regions.

Local authorities in London, with their homes, median rating and planning record
AuthorityMedianApproval rate
Barking and DagenhamC64.1%
BarnetC75.4%
BexleyD90%
BrentC78%
BromleyD76.9%
CamdenC88.1%
City of LondonC97%
CroydonD74.7%
EalingC84.5%
EnfieldD77.7%
GreenwichC77.5%
HackneyC81.8%
Hammersmith and FulhamC95.5%
HaringeyD85.2%
HarrowD77.6%
HaveringD74.4%
HillingdonD84.8%
HounslowC71.5%
IslingtonC88.8%
Kensington and ChelseaC92.8%
Kingston upon ThamesD75.4%
LambethC77.8%
LewishamC84.1%
MertonD89.3%
NewhamC82.8%
RedbridgeD72.4%
Richmond upon ThamesD81%
SouthwarkC91.9%
SuttonD89.6%
Tower HamletsC83.6%
Waltham ForestD76.1%
WandsworthC90%
WestminsterC85.9%

Homes are DESNZ household estimates and median bands come from the EPC register. Approval rates and decision speed are the nation's planning statistics — every kind of application, not only domestic work, and only the work that needed one. Figures marked illustrative are placeholders until a source replaces them; a dash means nothing published reaches that council.

Go from London to your own address

An area average is a starting point. A postcode gets the property's own record: its age, construction, current rating and what it could reach.